Ignite 3" (76mm) Turbo Back Sports Exhaust System by Playtime Auto Parts

Our exhausts are easy to install, and don’t require complicated ECU remapping or tuning on the dyno. We use aluminised steel tubing, thick cut laser plates & EGT Pyrometer fittings to ensure maximum durability, and maximum satisfaction with your upgrade!

Give your 4x4 a sweet upgrade with a new exhaust system. Manufactured & designed locally in Victoria, our in house products will give your vehicle improved performance, better fuel economy, and a more desirable sound. They also give a better towing experience.

The exhaust system for the 3.2L Mitsubishi ML Triton (2005 - 2015) are available in these configurations:

  • No Cat / Hotdog
  • No Cat / Muffler
  • No Cat / Pipe
  • Cat / Hotdog
  • Cat / Muffler
  • Cat / Pipe

Varies between selection.

SKU mtml32
Brand Ignite

2 Year Warranty.

All of our products are fully backed by Australian manufacturer warranty. 

Each product we sell comes with automatic guarantees that cannot be excluded under Australian law.

Should the item you receive be faulty in any way, please contact us and we’ll make sure the correct process is followed so the issue can be addressed as quickly as possible for you

  1. Remove rear tail pipe and muffler assembly from the vehicle.
  2. Remove centre connecting pipe from the vehicle.
  3. Remove flex join pipe from the vehicle.
  4. Remove turbo dump pipe heat shield.
  5. Remove gear box bracket.
  6. Remove turbo dump pipe. We advise to spray the 4 bolts with WD40 before removing.
  7. Insert the supplied EGT plug into the turbo dump pipe.
  8. Fit the turbo dump pipe cat/cat delete section to the turbo outlet flange using the supplied M10x1.25 nuts and M10x1.25 studs. Re fit gear box bracket at the same time and then tighten all 4 nuts/bolts.
  9. Fit the flex join pipe to the turbo dump pipe cat/cat delete section and tighten finger tight with the supplied 3/8 UNC nuts.
  10. Fit the connecting pipe to the flex pipe.
  11. Fit the pipe only/resonator or muffler section to the connecting pipe and tighten finger tight with the supplied 3/8 UNC nuts.
  12. Fit the tailpipe to the pipe only/resonator or muffler section and tighten finger tight with the supplied 3/8 UNC nuts.
  13. Check over exhaust making sure everything is aligned and then tighten all bolts and nuts from the front to back of the vehicle. If you have any fitting/alignment issues, please call 1300 12 13 12 as soon as possible to avoid damaging the exhaust system.
  14. Enjoy your IGNITE exhaust!

Related Products